The Helio X20 uses three different frequency cores
The biggest change in the Helio X20 is the first use of three cores with different frequencies. The high-performance core is two Cortex-A72 cores with frequencies up to 2.5GHz. The mid-load mission uses four A53 cores with a frequency of 2.0GHz. Will use four 1.4GHz A53 cores.
Of course, this design concept is very good, but the actual application is very testing the manufacturer's foundation, how to switch between size and core, how to switch delay, how to design the task scheduling, etc. will affect the user experience, which is also the 8 before MediaTek One of the reasons why the nuclear processor runs invincible and the application often appears to be stuck.
The official website was also dedicated to the Helio X20 (http://heliox20.com/), which introduced the highlights of the Helio X20 processor. In addition to the 10 nuclear highlights of the Helio X20 from the published specifications, other improvements are as follows:
The image sensor has been upgraded from 21 million pixels to 32 million pixels. It has also improved the noise reduction and sharpness of the dual ISP and supports native 3D.
2. Video decoding supports 10bit 4K H.264/H.265/VP encoding, reducing power consumption by 30%.
3, GPU performance improved, Helio X10 uses PowerVR G6200, X20 turned to ARM Mali series,
although there are rumors that the highest-end Mali-T880, but MediaTek did not announce the specific GPU model and core number, only announced the frequency of 700MHz, Performance is 40% higher than the G6200. In fact, the GPU boost is still very limited, so the resolution supported by the display is still 2K. Unlike Qualcomm's Opteron 810 and 820, it supports 4K output.
4, The network system has a small surprise, LTE network supports dual-carrier, Cat 6, the speed has increased from the original 150Mbps to 300Mbps.
The tablet model you can send the inquiry:
10.1 inch 64GB ROM Android 9.0 Tablet